Top > News Release > EIB-UG01-PF2, EIB-UG01-PL2
News Release
 

EL33-145

2017.12.26


It is most suitable for PoE Supported Devices setting to place that is hard to secure power supply!
It is stable and can operate at heat-resistant 50 degrees Celsius in severe environment
It releases PoE injector 2 product



ELECOM CO., LTD. (the head office: Chuo-ku, Osaka-shi, President: Junji Hada) sells PoE injector 2 product corresponding to IEEE 802 .1af which can supply power supply to PoE Supported Devices and af/at newly sequentially from the middle of January.

PoE injector is apparatus which can supply power supply to Network apparatus corresponding to PoE (Power over Ethernet).
When not only we transmit and receive data using LAN cable to Network apparatus connected to PoE (Power over Ethernet) by wired LAN, but also Network apparatus copes with PoE function by function that can supply power supply to apparatus, it is available.

When setting place is limited like Network camera and Fixed Wireless Access point, power supply construction may be necessary newly around setting place if there is not AC power. In this case it can supply power supply to PoE Supported Devices without AC power around apparatus if we use Network camera and Fixed Wireless Access point corresponding to PoE by installing This product between LAN cables to tie PoE Supported Devices and switching hub to. When we can reduce construction cost as it does not need additional construction of AC power, and there is limitation for additional construction of 100V power supply including tenant building, we can solve problem.

We prepared two kinds of products to be available depending on application of power ability. "EIB-UG01-PF2" can connect PoE-adaptive Network apparatus to up to 15.4W in correspondence with PoE standard "IEEE 802 .3af". When "EIB-UG01-PL2" is to up to 30.0W in correspondence with PoE standard "IEEE 802 .3af" and "IEEE 802 .3at", we can connect big Network apparatus of power consumption for PoE more.

It is compact Dimensions which we can install in corners such as racks with both products. We cope with "high heat resistance 50 degrees Celsius" by adopting metal case, and even severe environment of factory and the neighborhood of server rack is stable, and, in addition to electrolytic capacitor made in Japanese manufacturer, housing can operate.
Wall hangings are possible and can install in metal side such as rack wall surfaces by using screw for attached wall hangings by using optional magnet (EHB-EX-MG4). In addition, we prevent accident pulling AC cable by mistake by omission prevention band of AC cable.
As we cope with sendobakku guarantee extension and delivery guarantee with option, in addition to sendobakku guarantee for 3 years, operation is possible for long term of relief. In addition, guarantee is possible in addition to guarantee for 3 years for five years of extension guarantee two years in total by registering. In addition, it becomes eco-friendly product in conformity with "RoHS order" (we set a limit to use of specific harmful object for electric appliance, electronic equipment) of EU.




 

EIB-UG01-PF2
(IEEE 802 .3af correspondence)

 

EIB-UG01-PL2
(IEEE 802 .3af/at correspondence)










It is most suitable for PoE Supported Devices setting to place that is hard to secure power supply!
It is stable and sells PoE injector 2 product which can operate newly at heat-resistant 50 degrees Celsius in severe environment.

[Standard Features]

●PoE (Power over Ethernet) injector which can supply electricity to PoE-adaptive device through LAN cable

●We can install PoE Supported Devices such as Fixed Wireless Access point and IP telephone, Network camera casually near at place without power supply

●Compact Dimensions which we can install in corner

●We cope with high heat resistance 50 degrees Celsius by adopting metal case in electrolytic capacitor made in Japanese manufacturer and even severe environment of factory and the neighborhood of server rack is stable and operates

●Wall hangings are possible by using screw for attached wall hangings

●Setting is possible on metal surface such as rack wall surfaces by using optional magnet (EHB-EX-MG4) ※

●We prevent accident pulling AC cable by mistake by omission prevention band of AC cable

●It is optional, and, in addition to sendobakku guarantee for 3 years, operation is possible in correspondence with sendobakku guarantee extension and delivery guarantee for long term of relief

●Furthermore, add to guarantee for 3 years by registering, and in five years guarantee of extension guarantee two years in total

●Environmentally friendly product, compliant with the RoHS directives

※We support one in This product and, among magnet four bundling, use two

[common Specifications]

■Number of ports 2 ports (Data/Data+PoE)

■Connection method: 1000BASE-T/100BASE-TX/10BASE-T

■Network type: IEEE 802 .3ab/IEEE802.3u/IEEE802.3

■The number of the PoE-adaptive ports: 1 port

■Connector type: RJ-45 X 2 (one pair of 2 ports of input/output)

■Best Operational Environment: Temperature: 0 degrees Celsius - 50 degrees Celsius, humidity: 10% - 90% (but thing without dew condensation)

■Input Voltage: AC100-240V 50/60Hz

■Dimensions: About width 154 X depth 73.1 X 36mm in height (only as for the body)

■Weight : Approximately 410 g (only as for the body)

■Accessories: Exclusive AC power cable (3 pins, approximately 1.8m) X 1, 3 pin -2 pin conversion adapter X 1, prevention of AC cable omission band X 1, rubber foot X 4, screw X 2 for wall hangings

※When you use PoE function, please use 4 vs. UTP/STP cables more than category 5e for Ethernet cable. As for the cable head, it becomes just 100m.

af correspondence

IEEE 802 .3af-adaptive PoE injector "EIB-UG01-PF2" 7,600 yen (the body) tax-included price 8,208 yen

 

■PoE Specifications: IEEE 802 .3af conformity

■Ability for PoE power supply maximum supply: 15.4W

■Power consumption (maximum): 18.2W

af/at correspondence

IEEE 802 .3af/at-adaptive PoE injector "EIB-UG01-PL2" 9,800 yen (the body) tax-included price 10,584 yen

 

■PoE Specifications: IEEE 802 .3af/at conformity

■Ability for PoE power supply maximum supply: 30.0W

■Power consumption (maximum): 34.7W




The name of products and companies shown here are generally regarded as their trademarks or registered trademarks.
The description in this release are based on the information at the time of announcement. Please note that the descriptions are subject to change without prior notice.
If you wish to use the images of the ELECOM products, please go to image database system for press.