Portable power charger for smartphone of slim design
It is easy to be able to enter gaps such as bags in slim design and is portable power charger for smartphone of compact type that is convenient for carrying around.
< Black >
〈 Blue 〉
< Red >
< White >
High-performance IC is fastest, and it is charged from the most suitable output
High efficiency IC which we put on Universal Serial Bus port automatically distinguishes interconnect equipment and it is fastest and copes with "Charge to leave" which we can charge by the most suitable output.
High output model of 2.6A in total maximum 2 ports
2 ports are equipped with Universal Serial Bus port and can charge two smartphone at the same time. 2 ports are high output model that the output of up to 2.6A is possible in total.
We can largely shorten charge time
We can charge the portable power charger body in about 3 hours 40 minutes and can largely shorten charge time.
※At the time of use of AC Adapter output 1.8A or more. It is rechargeable even to be connected to Universal Serial Bus port of PC.
※It is charged around 70% at the time of factory shipment. As Charge-type lithium ion battery discharges electricity with time, we recommend what we charge before using.
※When we are placing cable, residual quantities of battery decrease. When you do not use, please take off cable by all means.
We can charge about 2.1 times of smartphone
We can charge about 2.1 times of smartphone in This product (battery capacity 6400mAh).
※Using This product which did Charge, it is the eyes cheap number of times when battery capacity charges smartphone of about 1800mAh. It is switched on in Charge and may not charge to number of mention when we use apparatus.
Charge method to portable power charger
We connect attached USB cable to USB(micro-B) port for Charge of This product and are rechargeable by being connected to AC Adapter which supported.
Charge method to iPhone
By using attachment or Lightning cable which supported to iPhone, iPhone is rechargeable, too. ※Product of image is DE-M01L-6400GN (khaki).
※Product of image is DE-M01L-6400GN (khaki).
We know residual quantity with LED
Battery residual quantity can be confirmed by four phases of LED lamp lighting.
About 500 times of repetition is available
It is equipped with Charge-type lithium-ion battery which about 500 times of repetition is available for.
We are based on JISC8711 and JISC8714
Built-in Charge-type lithium ion battery is safety design in conformity with JISC8711 and JISC8714.
We meet technical standard of the electrical equipment security method (PSE)
It is safe product which adapted to technical standard of the electrical equipment security method of Japan (PSE).
Circuit design of relief
It is hyperCharge, hyperelectric discharge, overvoltage, overcurrent prevention function, circuitry of relief with short circuit protection function, temperature detection protection.
Charge method to smartphone
We push and hold button for a few seconds until smartphone is charged from state that tied smartphone and portable power charger with Charge cable and is started.