Large furniture fall prevention appliance


At the time of earthquake occurrence, shock absorption pad absorbs shaking of earthquake; prevention of furniture fall appliance "yu retan" for seismic intensity of 7!


    Model number /JANCD Features Standard price Remarks
    TS-F011 4549550134453
    10,650 yen (tax-excluded)
    11,715 yen (tax-included)
    Under the release

      Features of product

      Introduction [TS-F011] of earthquake-resistant gussu "yu retan" of ELECOM

      • ※About Specifications of This product, please confirm the lower this page Specifications.
      • ※As Audio appears, please be careful about volume.

          Furniture fall prevention appliance "yu retan" for seismic intensity of 7

          It is furniture fall prevention appliance "yu retan" where shock absorption pad absorbs shaking of earthquake at the time of earthquake occurrence for seismic intensity of 7. We clear vibration test of a seismic intensity of 7 equivalency including Great East Japan Earthquake, Kumamoto earthquake, the Great Hanshin-Awaji Earthquake.

          ※Rear refrigerator with caster finishes proof experiment in fixed state with earthquake-resistant gel of Sold separately in the former bottom (reproduction wave of the Great East Japan Earthquake)

          We prevent fall of furniture

          Shock absorption pad absorbs shaking of earthquake and prevents fall of furniture.

          Installation is possible without moving furniture

          We can attach without moving furniture.

          Installation is easy

          We can install just to put This product on wall and furniture.

          We adopt the adhesion seat to be able to tear off

          We adopt the adhesion sheet to be able to tear off not to hurt obstacle. As sign does not remain, it is Specifications that it is easy to use on wall of lease.

          It is available for various furniture

          It is available to refrigerator (thing that top plate is plane), office shelf, locker, cupboard, various furniture including chest.

          Made in Japan of relief

          It is Made in Japan of relief.

          Wall materials which we can attach

          Wood, steel lumber, wall paper, plastered wall

          Wall materials which we cannot attach

          Cement mortar wall, wall with irregularities, special wall paper (surface tender wall paper, cork wall paper, Japanese paper, wall paper made of paper cloth, sliding paper-door, shoji)

          ※The wall paper materials mentioned above become reference example. Before use, we will recommend confirmation by the following "confirmation method of wall materials".

          Confirmation method of wall paper which we can attach

          1. We stick packing tape (20mm in width X around 50mm in length) made of commercial cloth on wall surface.
          2. Please confirm that you stick well.
          3. We tear off tape slowly for approximately three seconds. Please confirm whether a part of the wall materials does not attach to the adhesion side then. We attach and enable even point of the wall paper damage in terms of strength if it does not attach.
          • ※Please perform test at place that is not outstanding.

          Attachment means

          Before installation, please wipe off dirt, dust, water, oil content of installation part well.

          1. You tear off detachment paper of adhesive tape of base base, and please set "adjustment board (Styrofoam)" on the back of This product base.
          2. You thrust by one to pasting up, furniture each, and please follow in place of 1-20cm from edge of right and left of top plate of furniture. Afterwards, please pull up adjustment board in upper direction.
          3. We insert in base from the top while tearing off only detachment paper of A side of the Model T fixation parts, and pushing to wall in form crushing shock absorption pad of B side around 5mm.
            ※By pushing to base to strongly crush shock absorption pad of A side then, stick well.
          4. We tear off while pulling detachment paper of B side at the both sides same time and let wall glue B side together.
          5. It is installation completion in this. Please attach other This product by the same method.
            ※After the setting, please do not move for 72 hours to stabilize the adhesion.

          Caution in case of installation

          As the initial adhesive strength of shock absorption pad decreases at time when outside temperature falls and may not show original performance, we will recommend method to stick after sticking, and warming up aspect with dryers slightly. By warming up, the adhesive strength is restored and becomes able to stick well.

          Disassembly method

          1. We insert screwdriver in Front hole of base and move to twist in Application side horizontally. Please tear off slowly so that Application side rises.
          2. You send slotted driver to gap of both base sides and attach expectation tree, and please tear off in the principle of leverage.
          3. You put finger between the adhesion materials and wall like figure to take sponge part off wall surface, and please tear off little by little.
          4. When you are hard to tear off, you cut sponge part of This product with cutter and take off and tear off after warming up with dryers, and softening the adhesion side of sponge which it remained, or please use commercial tape stripping agent.

          Caution in case of disassembly

          When sensitive wall surfaces such as plastered walls such as the plaster, diatomaceous earth, paint remove, they might damage wall. As for the use to sensitive furniture such as unvanished wooden paulownia chest and lacquering, varnish coating, there might be change of color and detachment later. We appreciate your understanding.

          The recommended number of installation, weight reference list

          ※When centers of gravity are the center or less and include Package Contents

          A D
          B H (cm)
          120 or less 120-180 180-215
          100 or less 15-30 Two Two Two
          30-45 Two Two Two
          45 or more Two Two Two
          120 or less 15-30 Two Two Two
          30-45 Two Two Two
          45 or more Two Two Two
          150-200 15-30 Four Four Four
          30-45 Two Two Four
          45 or more Two Two Two
          200-300 15-30 Four Four Four
          30-45 Four Four Four
          45 or more Four Four Four
          • ※This product is intended to minimize fall by shaking and does not take responsibility for damage and accident caused by earthquakes.


          Dimensions 133mm in width X 154mm in depth X 127mm in height
          Weight About 274 g (one)
          Color: < White >
          Enter; number Two
          Application temperature -10 degrees Celsius - 50 degrees Celsius
          Service life Eight years (it varies according to terms of use)
          Withstand load 150 kg (at the time of use of two)
          Materials: ABS resin, polyether foam, the cloth adhesion materials, Styrofoam, polyethylene foam
          Others Patent Registered
          • Specifications may change without a notice, thank you for your understanding.