Setting casebook

Setting casebook | Access point for corporations Wireless network
We distribute for each department

We introduce setting example of access point for corporation.

Configuration diagram, condition

Configuration diagram

Control settings

VLAN setting being done by layer 2 Switch.
Setting example in ELECOM layer 2 Web Smart giga Switch EHB-SG2A series is this
Base item being set for Fixed Wireless Access point
Fixed Wireless Access point item to set individually is this place
We use Fixed Wireless Access point one, layer 2 Switch one
※In the Fixed Wireless Access point, layer 2 Switch explains EHB-SG2A24 for example in WAB-I1750-PS.
We make VLAN 2 groups.
※Please read port which setting intends for for SSID depending on environment.
Layer 2 Switch:
Port 1-8 tagless VLAN1:, port 24 with tag, trunk port 9
Port 10-16 tagless VLAN2:, port 24 with tag
Fixed Wireless Access point:
It is allocation to VLAN1 SSID1
It is allocation to VLAN2 SSID2

Target product

WAB-I1750-PS
Firmware version: Ver.1.4.17
WAB-S1167-PS
Firmware version: Ver.1.4.17
WAB-S600-PS(11ac-adaptive firmware application)
Firmware version: Ver.1.0.3

Flow of setting

STEP1

Management screen > "Wireless setting" > 2.4GHz basics setting
Management screen > "Wireless setting" > 5GHz basics setting

  • We set VLAN ID in each SSID.
    ※ As setting example, we set VLAN ID corresponding to SSID as `EIGYOU' in `SOUMU ',` sales department' in "the general affairs department".
  • "VLAN setting -2.4GHz"
    [the number of the effective SSID] We set SSID and VLAN ID of the number that should remain in effect in this.
  • We set effectively.
  • We set the number of SSID.
  • SSID name
  • When we perform Network isolation using VLAN,
      We input VLAN ID of correspondence into each SSID.
      VLAN ID: We set integer value to 1-4096 in each SSID.
  •   ※Item about security of wirelessly connecting is this place

  • "VLAN setting -5GHz"
    [the number of the effective SSID] We set SSID and VLAN ID of the number that should remain in effect in this.
  • We set effectively.
  • We set the number of SSID.
  • SSID name
  • When we perform Network isolation using VLAN,
      We input VLAN ID of correspondence into each SSID.
      VLAN ID: We set integer value to 1-4096 in each SSID.
  •   ※Item about security of wirelessly connecting is this place

STEP2

Management screen > "System configuration" > VLAN

  • We set port to connect to L2 Switch to port with tag.
  • We set to port with tag.

With the above setting is completion.

Commentary

The configuration file

Setting example file is made [downloading].
※Please store target file by right-click.

※The following configuration files are samples.
Setting of Switch is changed below when we apply.

[layer 2 Switch]

EHB-SG2A24
IP address: 192.168.3.254
Login user name: admin
Login password: admin
Firmware version: Ver. 1.0.1.2_RT6 : Downloading> of the configuration file

[Fixed Wireless Access point]

WAB-I1750-PS
IP address: 192.168.3.1
Login user name: admin
Login password: admin
Firmware version: Ver.1.4.17 :Downloading> of the configuration file
WAB-S1167-PS
IP address: 192.168.3.1
Login user name: admin
Login password: admin
Firmware version: Ver.1.4.17 : Downloading> of the configuration file
WAB-S600-PS(11ac-adaptive firmware application)
IP address: 192.168.3.1
Login user name: admin
Login password: admin
Firmware version: Ver.1.0.3 : [during preparations]

※Setting of Fixed Wireless Access point and Switch varies according to network environment.
When read, current setting is changed setting example file, communication may not set.
※Before application, please store current setting by all means.